Call Now!
Call
Now
Email
Today
Listed for install in Lake Worth and throughout the United States
Made in Texas.
|
PRE-BUILT SIZES |
|
|
CUSTOM SIZES AVAILABLE Fast Turnaround |
Although we can custom build any sized programmable LED marquee sign we also make two sizes in bulk, offering you tremendous savings over a custom built sign. Ask your Sign Expert for details.
You have questions, we have answers. Because we are a fabricator, and we aren't just buying our signs from a 3rd party (usually China), if you have any questions about your sign, how it works, how it programs, power requirements, etc. we are just a short phone call away. If you prefer email, we will respond within just a few hours at the most. Go ahead, TEST US!
Do you need your sign quickly? Typical custom fabrication can take 8 weeks. But our pre-built models can be installed right away. Ask your Sign Expert for the FAST TURNAROUND sign.
All of our LED signs are built in-house to eliminate the middleman delays and profits. You will get the highest quality LED sign at the lowest price possible!
We can be completely responsible for your sign, including any masonry, foundation, installations, permitting, etc. Let us take care of the entire sign project for you!
Because our signs are built in our DFW facility, you are welcome to come and visit your signs in production at any time.
If you have any questions, our staff ALWAYS answers the phone during regular business hours. There is no voicemail or dodging calls ... you call, we answer.
Full-Color LED Sign (resolutions from 20mm to 6mm) |
YES |
RGY 3-color, non-video, non-gray-scale display |
NO |
Electronic Message Center Display Capability: 4,000 shades or 4+ billion colors and shades |
YES |
Shading Glare Shields |
YES |
Electronic Message Center Viewing Angles: 170° horizontally, 85° vertically |
YES |
Impact-Resistant, UV Protected, Flame-Resistant Sign Faces |
YES |
FREE Wireless Bridge Connector |
YES |
Hand-Held Programmer |
NO |
Encrypted Security Access to Display |
YES |
Standalone Software Capability (included FREE) |
YES |
Pre-Programming of the Sign |
YES |
Internal DSMP Processor in Sign |
YES |
Cloud-Dependent for Programming |
NO |
Internet-Dependent for Programming |
NO |
Pre-Programmed Tutorials |
YES |
Factory-Direct Technical Support always available |
YES |
Open-Architecture Programming Software |
YES |
Sign Text/Graphics Capabilities |
YES |
Video Capabilities |
YES |
Animation |
YES |
Slide-show Playback |
YES |
Double-Faced OR Single/Double Programming Option |
YES |
LED Video Display Sign Time & Temperature |
YES |
Automatic Display Brightness Adjustment |
YES |
FailSafe™ Display Maximum Brightness Adjustment - REQUIRED BY SOME CITIES |
YES |
Wireless Modem Link to Programming Computer |
YES |
Cat.5 Linkable to Programming Computer |
YES |
Cellular Link to Programming Computer Available |
YES |
Self-Monitoring/Remote Servicing (requires internet connection) |
YES |
Reparability - Adjust Individual LEDs for Brightness and Color |
YES |
All Aluminium Exterior Metal |
YES |
CNC Precision Manufacturing: |
YES |
Redundant Grid Wiring System with Anti-corrosion Connectors |
YES |
MIL-I-4605C US Military Specification Electrical Insulation Coating |
YES |
H2ORepel™ Waterproof Interior Coating |
YES |
Self-Cleaning Sign Faces |
YES |
ANSI/UL 5.2 24 hour Temperature Rise Tested |
YES |
ANSI/UL 5.5 24 hour Electrical Usage and Stability Tested |
YES |
ANSI/UL 5.7 Gasket Aging Tested |
YES |
ANSI/UL 5.8 Gasket Adhesion Tested |
YES |
ANSI/UL 5.9 Exclusion of Water Tested |
YES |
ANSI/UL 5.3 Hi-Pot Tested while the Sign is Wet |
YES |
ANSI/UL 5.1 Bond Impedance Tested |
YES |
ANSI/UL 8.2 Electronics Input Tested |
YES |
ANSI/UL 8.12.1 Electronics Humidity Tested |
YES |
IEC/EN 61000-4-1 thru 6-4 EMI and EMC Tested |
YES |
Mil Std. 883 High Heat Tested |
YES |
Mil Std. 810 High Altitude Tested |
YES |
ASTM D 5048/UL 94 5VA Flammability Tested |
YES |
ASTM D149-09 Dielectric Voltage Withstand Tested |
YES |
Internal Branch-Circuit Breakers HUGE ELECTRICAL COST SAVINGS |
YES |
Reverse Polarity Protection |
YES |
Labeled and Listed - REQUIRED FOR THE SIGN TO BE INSTALLED IN TEXAS |
YES |
5 Year $0 Cost Warranty |
YES |
Both Parts AND Labor Warranty (if installed) |
YES |
LIFETIME Labor Discount with Order |
YES |
Factory-Direct Local Parts Source |
YES |
Factory-Direct Installation Available |
YES |
Factory-Direct Local Service Available |
YES |
Virtually ALL cities, as well as the State of Texas, adopt the National Electric Code as law.
The National Electric Code (NEC) requires that for electrical, structural, and installation safety all electrical signs be "Listed" (tested and labelled with an appropriate Listing Mark.)
Certification (testing and labeling) organizations acceptable in the USA to test to the multitude of Standards signs are required to meet are determined by OSHA.
For you the Listing Mark is insurance. It means that the sign has been tested to insure that it is structurally and electrically safe, and will be installed properly. You benefit from the knowledge that it is not solely us telling you that our signs are safe, this is what the testing laboratories and the US Government says also.
Will your sign be tested and approved for safe use in a Wet (Outdoor) location? Not if it’s not Listed!
If the sign you are purchasing does not have a ETL or UL Listing Mark label the sign is probably not legal to install, anywhere in Texas. There are a few local city ordinance exceptions.
Buy carefully.
It is difficult to picture what a sign is going to look like.
Our showroom is designed to solve that problem. Most people are visual ... they need to see something firsthand to understand what it is and whether it has value to them. Seeing is believing!
Don't buy your sign from a drawing, a slick website, or photo-shopped pictures, when you can actually see and side-by-side compare Real signs and designs.
How can you determine what resolution is best for your business without seeing it for yourself?
Come to our Showroom and see the displays in person. Let us help you determine what the best resolution for your business is (tighter resolution isn't necessarily better) so you can make an informed decision.
See our production facility, don't let a fancy website make up your mind for you.
We invite you to observe all types of signage, viewing them up close as well as from a distance, under varying light conditions (and stay out of the weather while doing so!)
In addition to digital signs our showroom also displays channel letter signs, both neon and LED lighted. Reverse channel letter signs. Cabinet signs, fluorescent, HID, or LED lighted. Neon and LED building accent lighting. Pinlights' signs. Letterlites' signs. Pole, pylon and monument signs. Color-changing signs. Signs with wall-wash lighting. Routed sign faces. Digitally printed and cut vinyl decorated sign faces. Push-thru lettering. And more.
FOR ORDERING OR ASSISTANCE CALL:
214-339-2227 | 254-582-7446 | 817-861-1234 | 903-561-5959 | 940-365-3433 | 972-850-3300
877-SINCE79 TOLL-FREE
Sales Team: Sales@SignsManufacturing.com
Lake Worth Signs Manufacturing
4610 Mint Way, 75236
(817)886-0516
Business hours are 07.00 a.m. to 5.00 p.m. Monday thru Friday (Central Time)
or by Appointment
Office hours are 08.00 a.m. to 5.00 p.m. Monday thru Friday
Showroom hours are by Appointment
Factory Tours by Appointment
Emergency Service 24/7
©Copyright 1979-2025 Signs Manufacturing Corporation ALL RIGHTS RESERVED